EZScreenPrint Frequently Asked Questions
Q: What are EZScreenPrint Stencils?
A: EZScreenPrint Stencil is a material for creating custom stencils without the tedious process of cutting your own. Instead it uses black and white images on plain white paper or, transparency, sunlight and tap water. And because it's based on silkscreen with a light sensitive coating, you can create very intricate designs that are virtually impossible with traditional stencils. Plus, no expensive equipment or toxic chemicals are required. EZScreenPrint Stencils are reusable. Clean with plain tap water, latex paint remover, paint thinner or oil based paint remover, let dry and reuse. Glass etching creams won't harm EZScreenPrint Stencil. Etch glass with the same stencil over and over again. When etching glass, be sure to use a light coating of stencil adhesive spray, tape, or slightly dampen the stencil. EZScreenPrint Stencil becomes tacky when damp and will adhere to glass or hard surfaces.
Q: How do I know which EZScreenPrint Stencil to use, Standard or HiDef?
A: There are a few things to consider when choosing Standard or HiDef.
Standard is typically used for fabric such as t-shirts, sweatshirts, and other porous surfaces. Standard is easier to clean after exposure to light source, easier to use when applying ink or paint, and is more suited for multiple printing. Standard is appropriate for most projects and can achieve incredible details. However, a mesh pattern transferred to the paint may be more visible, and the edges may not be as sharp on hard surfaces. Applying paint or ink to fabric or other types of porous surfaces will not have this problem.
HiDef is intended for artwork with smaller details or halftones. Typically used for hard surfaces such as glass and metal. HiDef has a higher thread count so the green residue may cling to the mesh making it harder to clean after exposure to light source. More pressure may be needed when applying paint or ink. Not all paints are suitable for HiDef, such as ceramic or metallic paints; the pigments may be too large and may not go through the mesh. It is important to test the paint first. You can achieve superb details with HiDef and the mesh transferred to the paint is less visible on hard surfaces.
Q: How long will the stencil last and how many times can it be used?
A: With proper care EZScreenPrint Silk Screen Stencils will last a long time and can be used over and over again. After applying ink or paint immediately clean the stencil, let it completely dry then use it again and again. Do not allow paint to dry on stencil.
Q: Can EZScreenPrint Stencil be exposed on a cloudy or overcast day?
A: No. Exposure time may vary too much if it’s cloudy or overcast, therefore, we DO NOT recommend exposing on a cloudy or overcast day as it may filter the UV at different levels. Expose EZScreenPrint Stencil in DIRECT SUNLIGHT only. You can expose EZScreenPrint Stencil anytime day or night with our exposure light unit.
Q: Can EZScreenPrint Stencil print in multiple colors?
A: Typically no. EZScreenPrint is intended for one color printing. The color separation is a challenge. The silkscreen mesh will shift and will not align properly for the next layer of color. However, you can achieve simple multi color application that does not require precision registration, such as a heart on a I heart New York t-shirt.
Q: Can EZScreenPrint Stencils be cut to the size I need?
A: Yes, you can cut EZScreenPrint Stencil and make a stencil to the size you need. Allow at least a half-inch border all around the artwork.
Q: What can I use to hold the stencil in place?
A: Use tape or try stencil adhesive spray. Just a light spray will do the job. The stencil will remain tacky even after cleaning it. For hard surfaces wet the stencil, then blot on paper towels. The stencil becomes tacky when wet and adheres to hard surfaces like glass, plastic, and metal. Make sure the stencil is not too wet otherwise the paint will bleed.
Q: How large are the EZScreenPrint Stencil sheets?
A: Our regular sheets are 8.5"x11". Mini kits comes in smaller sheets 4.25"x5.5". Our largest size is the EZScreenPrint Standard Roll, 11"x17", to be used with the large exposure frame 13"x19", sold separately.
Q: Will EZScreenPrint Stencil work with printed circuit board (PCB)?
A: In theory it should, however, since printed circuit boards require precise alignment, it is not recommended. The fact that EZScreenPrint Stencil comes in sheets can cause it to deform beyond the ability to make a good circuit board.
Q: Can I make EZScreenPrint Stencil with halftones?
A: Yes. Unlike traditional plastic stencils that are essentially silhouettes, our stencils can do halftones and line art and even contain floaters. Draw your own images using black opaque pens on white paper and use it directly without damaging the original. Test out a small piece first before committing to a larger piece of EZScreenPrint Stencil. Use larger dot per inch halftones. For best results use transparency printed on the best print quality and heavy ink. EZScreenPrint HiDef Stencil is recommended for more detailed images and halftones.
Q: How do I clean the EZScreenPrint Stencil?
A: EZScreenPrint Stencil typically cleans with regular tap water, soap and water, latex paint remover, acetone or paint thinner. Type of cleaner depends on the paint being removed. Test small area before cleaning. Although EZScreenPrint silk screening stencils are fairly rugged, do not scrub film side, fold or ring out to dry. After cleaning, place on flat surface on top of paper towels for drying or plastic canvas. Lay stencil with shiny (tacky) side facing up. Note: Never place shiny side of EZScreenPrint silkscreen on any surface while drying. Doing so will cause the stencil to stick to the surface. If this happens, re-soak the silk screen stencil until it releases.
Q: Do I need a photographic dark room to develop EZScreenPrint Stencils?
A: No. EZScreenPrint Stencils can tolerate a few minutes of exposure to light levels found in typical homes as long as it is kept several feet away from artificial light sources and is protected from direct sunlight. Minimize exposure to florescent tubes; they emit more UV energy then incandescent bulbs. Illuminate work area with yellow bug lights (60 watts or less) if additional lighting/working time is desired. Fully developed EZScreenPrint silk screen stencils do not require protection from light. Do not remove protective clear backing until ready for use. Once backing is removed, handle EZScreenPrint silk screen stencil from edges only. Avoid putting fingerprints or scratching surface of photosensitive film.
Q: How should I store EZScreenPrint Stencils?
A: Keep undeveloped EZScreenPrint Stencils in black bag and store in refrigerator. Protect from freezing and high humidity. Ideal temperature range is 65 to 75 degrees Fahrenheit. EZScreenPrint Stencils degrades quickly above 110 degrees.
Q: Does EZScreenPrint Stencils have a shelf life?
A: Yes. We recommend you use it within six months of purchase. Shelf life can be dramatically affected by temperature conditions while storing. For longer shelf life, store undeveloped EZScreenPrint Screen Printing Stencil in your refrigerator.
Note: Once the stencil has been developed there is NO longer a shelf life. Be sure to store the stencil flat such as in a folder or sheet protector in a binder.
Q: Can I use my own artificial light source to expose EZScreenPrint Stencil?
A: Many artificial light sources may work. However, there are too many to know what the individual exposure time would be or if it will work properly at all. Therefore, we do not support alternative light sources, other than our own exposure light unit. If you choose to use your own artificial light source, you will need to experiment with the exposure time using small test pieces. Halogen and blue lights do not work. Use direct sunlight if possible, or our own exposure light unit.
Q: What do I need to get started?
A: If you are new to EZScreenPrint Stencils, here is a list of items you will need to get started. Click here >>>