Need Help Getting Started
These are our recommendations of what you will need to get started using EZScreenPrint Stencils and on your way to create your very own custom t-shirts and crafts!
If you are new to EZScreenPrint, here is a list of items you will need to get started. Some of these items are optional, however, extremely helpful - especially for multiple printing:
EZScreenPrint Basic Starter Kits - comes with everything you need to make a stencil.
- One - Exposure Frame
- Two - 8.5”x11” EZScreenPrint Sheets
- One - 2” Squeegee
- One - Plastic Canvas (Not included in mini starter kits)
- Two - Test Pieces
- Instructions
Refill Sheets - if you have several designs, Standard or HiDef EZScreenPrint (optional)
EZScreenPrint Stencils are available in refill sheets. Choose from 3, 5, 10 and 20 packs.
EZScreenPrint Standard Roll - for larger stencils 11"x17" Roll (optional)
If you need a larger stencil, EZScreenPrint comes in a 11"x17" size. Choose from one roll or a value pack of five.
Plastic Canvas - to support the EZScreenPrint Stencil during rinsing and cleaning ink. Included in Standard and HiRes Kit. Not included in mini kits. Comes in various sizes and types.
Black Foamies - used to cover EZScreenPrint Stencil in exposure frame unit before and after exposure to direct sunlight (optional) You can use cardboard or a towel instead. Included in all starter kits except mini kits.
Squeegees - comes in different sizes, 9" Speedball squeegees also available (optional)
Plastic Frame - helpful for multiple printing (optional)
Improve your efficiency with a plastic frame. There is no need to wash the stencil after each print. The number of prints depends on your skill level and practice. Also, helps to prevent the ink from going over the edge of the stencil onto the shirt. Use tape (masking tape, scotch tape, etc.) to adhere the stencil to the frame. Plastic frames are available in a variety of sizes.
Inks - Speedball, or Jacquard screen printing inks
Choose from Speedball and Jacquard screen printing inks. Both are ideal for EZScreenPrint. They are slow drying for multiple printing and washes off with water. Heat setting is required to prevent fading. Use a heat press or a dry iron set on the highest temperature. Keep the iron moving to prevent scorching. Wait one week before washing.
Versatex Fixer - heat setting is not required if you mix fixer into the ink. It can be mixed with Speedball, Jacquard, or Versatex Inks. (optional)
Exposure Light Unit - if you do not have direct sunlight (optional)
When direct sunlight is not available. Expose/burn EZScreenPrint Stencil any time day or night with our affordable light unit.
Add a little BLING
Check out these helpful pages: